The plumbing system of your home isn’t something you should take for granted. In order to make your plumbing work flawlessly, it usually takes rigorous maintenance and quick and efficient repair and replacement of every malfunctioned part.
The best indicator that your plumbing needs repair is the presence of various noises that range from funny to annoying.
Depending on the type of sound you’re hearing, you might be able to determine what exactly is wrong with your plumbing.
This article will help you find out what’s wrong with your plumbing according to the sounds it makes.
Drip!
There are few more annoying sounds than the dripping of a seemingly perfectly turned off faucet. Not only the sound is audibly irritating, but it also reminds you that you’re wasting precious water.
This problem is usually easily fixed by replacing a washer, but if your washbasin or bathtub appliance is older than 20 years, you will probably have to replace your faucet, more so if dripping persisted and came back repeatedly.
Another malfunction that could cause annoying dripping happens in your kitchen sink sprayer. If you happen to see that your sprayer barely sprays any water, it is probably happening because of the diverter valve being clogged.
The diverter valve is located in the faucet handle. What you need to do is to take it out and soak it well in a white vinegar solution. If the problem persists, simply replace the valve.
Squeak!
Squeaking is usually associated with relatively minor problems with a faucet, but it’s nonetheless very high on the irritation scale.
It is indeed one of the most annoying plumbing noises possible. The good thing is that the repairing process doesn’t take much time and money.
Squeaking is usually solved by a washer change or applying the plumber grease to the faucet handle stem. Similar to the previous problem, if a faucet outlasted its good performance, there might be a time to replace it.
Screech!
Although screeching and whistle of the pipes aren’t indicators of a serious problem, they’re nevertheless very annoying and even frightening for some people.
The main trouble with banshee screaming whenever you open the faucet is pinpointing the exact location of the malfunction. There are several probable places where a trouble might occur.
The easiest trouble to solve is having air in your pipes. All you have to do is to close the water shut off valve and turn the faucet full power until it runs dry.
However, you might have some kind of obstruction in your pipes, such as debris or dirt. Simple flushing the system with water will solve that one. If your water pressure may not be turned up high enough, there are several ways to fix that.
For a short term fix, turn on the faucet to full pressure every time. If you want to get rid of the annoyance for good, replace faucet washers or valve system, as well as adjust your regulator of water pressure.
Whoosh!
It’s quite bothersome to hear whooshing or rumbling sound while you are trying to relax in the shower. The cause for that sound is probably a build-up of mineral sediments, also known as limescale, either in water or in pipes.
This defect is typical in areas with very hard water. In order to remove limescale, you should flush your water heater once a year.
If plumbing pipes make a problem, you should probably hire a professional number to clean them. Either way, you should probably fix a water softening system in order to prevent this sort of problem in the future.
Thud!
One of the most startling sounds you can experience concerning your plumbing system is a sudden thud followed by shuddering pipes. The main culprit for that is a so-called water hammer effect.
When a fast-closing valve shuts the water flow off quickly, the water suddenly stops in the pipes, which generates the aforementioned hammer effect.
This effect is an indicator of serious problems for your pipes, and louder sound could mean the problem got worse. There are a couple of solutions for the water hammer effect.
One of them is adding an arrestor to your pipes in order to diminish the hammer effect. The other is to replace toilet fill valves with slow shutting ones, so the water doesn’t shut off too sudden.
Conclusion
Strange and weird noises in the plumbing system can be a source of concern and annoyance if they persist for a long time.
Excluding the aggravation factor, these sounds might be signs of some major trouble within your plumbing system.
Therefore, if you’ve heard some strange and disturbing noise somewhere in your plumbing, it’s advisable to investigate the likely causes and fix the eventual issues. That way you’ll save your nerves and your money if you prevent some bigger plumbing issue.
Related Posts
- Comparison of HardieBacker Cement Board vs Plywood For Tiling Projects
- 6 Great Alternatives to HardieBacker Cement Board
- Comparison of WonderBoard vs GoBoard Used as Tile Backer Boards
- How Much Does it Cost to Furnish a House – Living Room,Bedroom,Kitchen etc
- 5 Benefits of Spray Foam Insulation During Summer
- Here are Some Plumbing Installation Tips For your New Home
Leave a Reply